Page 104 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

MAINTENANCE
HEADLIGHT AIM

Place the motorcycle on a level surface.
[1]
Adjust the headlight Adjust the headlight beams vertically by turning the
beam as specified vertical beam adjuster [1].
by local laws and
regulations.

CLUTCH SYSTEM (CRF1000/A)

Measure the clutch lever freeplay at the end of the
clutch lever.

FREEPLAY:10 – 20 mm (0.4 – 0.8 in)

10 – 20 mm
(0.4 – 0.8 in)

The adjuster may Minor adjustment is made with the upper adjuster at the
be damaged if it is clutch lever. [1]
positioned too far Loosen the lock nut [1] and turn the adjuster [2].
out, leaving minimal
thread If the adjuster is threaded out near its limit and the
engagement. correct freeplay cannot be obtained, turn the adjuster all
the way in and back out one turn.
Tighten the lock nut while holding the adjuster.
Recheck the clutch lever freeplay.

[2]
Major adjustment is made with the lower adjusting nut
[1] at the clutch lifter arm.
Loosen the lock nut [2] and turn the adjusting nut to [1]
adjust the freeplay.
Tighten the lock nut while holding the adjusting nut.
If proper freeplay cannot be obtained, or the clutch slips
during test ride, inspect the clutch (page 12-8).

[2]

3-22