Page 107 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

MAINTENANCE
REBOUND DAMPING ADJUSTER

• Always start on fully hard when adjusting the
damping.
• Do not turn the adjuster screws more than the given
positions or the adjusters may be damaged.
The rebound damping can be adjusted by turning the
adjuster [1]. [1]
Turn the rebound adjuster clockwise until it stops
(maximum position), then turn the adjuster
counterclockwise.
REBOUND ADJUSTER STANDARD POSITION
(from maximum position):
11 clicks

COMPRESSION DAMPING ADJUSTER

• Always start on fully hard when adjusting the
damping.
• Do not turn the adjuster screws more than the given
positions or the adjusters may be damaged.
The rebound damping can be adjusted by turning the
adjuster [1]. [1]
Turn the compression adjuster clockwise until it stops
(maximum position), then turn the adjuster
counterclockwise.
REBOUND ADJUSTER STANDARD POSITION
(from maximum position):
14 clicks

NUTS, BOLTS, FASTENERS

Check that all chassis nuts and bolts are tightened to
their correct torque values (page 1-12).
Check that all safety clips, hose clamps and cable stays
are in place and properly secured.

3-25