Page 23 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

GENERAL INFORMATION
CRANKSHAFT/PISTON/CYLINDER
THREAD TORQUE
ITEM Q'TY N·m (kgf·m, REMARKS
DIA. (mm)
lbf·ft)
Crankpin bearing cap bolt (new) 4 9 22 (2.2, 16) + 120° Apply engine oil to the threads and
seating surface.
Replace with a new one.
Main journal bolt 6 10 43 (4.4, 32) Apply molybdenum oil solution to
the threads and seating surface.
Crankpin bearing cap bolt 4 9 22 (2.2, 16) + 90° Apply engine oil to the threads and
(retightening) seating surface.
ENGINE REMOVAL/INSTALLATION
THREAD TORQUE
ITEM Q'TY N·m (kgf·m, REMARKS
DIA. (mm)
lbf·ft)
Right lower frame bolt 4 10 44 (4.5, 32)
Swingarm pivot nut 1 16 80 (8.2, 59) Apply engine oil to the threads and
seating surface.
U-nut
Rear lower nut (10 mm) 1 10 44 (4.5, 32)
Front lower nut (10 mm) 1 10 44 (4.5, 32)
Front middle nut (8 mm) 2 8 32 (3.3, 24)
Front middle nut (10 mm) 1 10 44 (4.5, 32)
Front upper bolt 3 8 32 (3.3, 24)
Rear upper bolt (8 x 25 mm) 2 8 32 (3.3, 24)
Rear upper nut (8 mm) 1 8 32 (3.3, 24)
Drive sprocket bolt 1 10 54 (5.5, 40)
EOT sensor (CRF1000D) 1 10 15 (1.5, 11)
Clutch EOP sensor wire stay bolt 1 6 12 (1.2, 9)
(CRF1000D)
Clutch EOP sensor cover socket bolt 2 6 10 (1.0, 7)
(CRF1000D)
FRONT WHEEL/SUSPENSION/STEERING
THREAD TORQUE
ITEM Q'TY N·m (kgf·m, REMARKS
DIA. (mm)
lbf·ft)
Handlebar weight bolt 2 18 55 (5.6, 41) ALOC bolt: replace with new ones.
Lower handlebar holder mounting 2 10 39 (4.0, 29) U-nut
nut
Upper handlebar holder socket bolt 4 8 32 (3.3, 24)
Left handlebar switch housing 2 5 2.5 (0.3, 1.8)
screw/washer
Right handlebar switch housing 2 5 2.5 (0.3, 1.8)
screw/washer
Front brake master cylinder holder 2 6 9.8 (1.0, 7.2)
bolt
Pulser ring bolt (CRF1000A/D) 3 5 7 (0.7, 5.2) ALOC bolt: replace with new ones.
Front brake disc bolt 12 6 20 (2.0, 15) ALOC bolt: replace with new ones.
Front axle holder pinch bolt 4 8 22 (2.2, 16)
Front axle nut 1 16 60 (6.1, 44)
Fork bolt 2 – 35 (3.6, 26)
Fork damper lock nut 2 10 20 (2.0, 15)
Fork socket bolt 2 – 34 (3.5, 25)
Fork bottom bridge pinch bolt 4 8 25 (2.5, 18)
Fork top bridge pinch bolt 4 8 22 (2.2, 16)
Front brake hose clamp mounting 1 6 10 (1.0, 7)
bolt
Steering stem adjusting nut 1 26 15 (1.5, 11) See page 17-26
Steering stem nut 1 24 100 (10.2, 74) See page 17-26

1-17