Page 420 - 2019 SHOP MANUAL CRF1000/A/D

du
dummyheadmmyhead

FRONT WHEEL/SUSPENSION/STEERING
Place the handlebar [1] on the lower holders while
aligning its paint mark [2] on the handlebar with the [4]/[5] [3]
edge of the lower holders.
Install the handlebar upper holders [3].
Install the socket bolts [4].
Tighten the front bolts first, then tighten the rear bolts to
the specified torque.
TORQUE:32 N·m (3.3 kgf·m, 24 lbf·ft)
Install the caps [5].

[2] [1] [2]

Install the left handlebar switch housing [1] by aligning [1]
its locating pin with the hole in the handlebar. [2]
Tighten the upper screw/washer [2] first, then the lower
screw/washer [3] to the specified torque.
TORQUE:2.5 N·m (0.3 kgf·m, 1.8 lbf·ft)

Align [3]
CRF1000/A: Install the clutch lever assembly [1] by aligning its end
with the paint mark [2] on the handlebar. [1]
Install the holder [3] with its punch mark [4] facing up.
Tighten the upper bolt [5] first, then the lower bolt [6]. [5]

[3]

[4]

[2] [6]
CRF1000D: Install the parking brake lever assembly [1] by aligning
its end with the paint mark [2] on the handlebar. [1]
Install the holder [3] with its punch mark [4] facing up.
Tighten the upper bolt [5] first, then the lower bolt [6].
[5]
[3]

[4]

[2] [6]

17-8