Page 446 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

REAR WHEEL/SUSPENSION
WHEEL BEARING REPLACEMENT
Drive out the rear wheel distance collar B [1] by using
the special tools.
TOOLS:
Driver [2] 07749-0010000 [2]
Attachment, 22 x 24 mm [3] 07746-0010800
Pilot, 17 mm [4] 07746-0040400 [5]

Drive out the bearing [5]. [3]

[4] [1]
Replace the wheel Install the bearing remover head [1] into the bearing.
bearings in pairs. From the opposite side, install the bearing remover
Do not reuse old shaft [2] and drive out the bearing from the wheel hub.
bearings.
TOOLS:
Bearing remover head, 20 mm 07746-0050600
Bearing remover shaft 07GGD-0010100 [2]
Remove the distance collar and drive out the other
bearing.

[1]
Never install the old Drive in a new right side bearing [1] squarely until it is
bearing, once the fully seated.
bearing has been
removed, the TOOLS: [2]
bearing must be Driver [2] 07749-0010000
replaced with new Attachment, 42 x 47 mm [3] 07746-0010300
ones. Pilot, 20 mm [4] 07746-0040500
[3]
Install the distance collar.
Drive in a new left side bearing squarely until it is
seated on the distance collar.

[1] [4]
Drive in the rear wheel distance collar B [1] to a new
bearing [2].
TOOLS:
Driver [3] 07749-0010000 [3]
Attachment, 28 x 30 mm [4] 07946-1870100
Pilot, 20 mm [5] 07746-0040500
[4]
[1]

[2] [5]

18-6