Page 450 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

REAR WHEEL/SUSPENSION
BEARING REPLACEMENT
CUSHION ARM
Remove the needle bearings (17 x 24 x 30 mm) [1] and
(20 x 26 x 20 mm) [2] using the special tools. [3] [5]
TOOLS:
Remover weight [3] 07741-0010201 [2]
Remover handle [4] 07936-3710100
Needle bearing (17 x 24 x 30 mm):
Bearing remover set, 17 mm [5] 07936-3710300
Needle bearing (20 x 26 x 20 mm): [4]
Bearing remover set, 20 mm [5] 07936-3710600

[1]
Remove the needle bearing (17 x 24 x 17 mm) [1] using
the special tools and hydraulic press.
TOOLS:
Driver handle 15 x 280L [2] 07949-3710001 [2]
Attachment, 22 x 24 mm [3] 07746-0010800
[3]

[1]
Never install the old Apply molybdenum disulfide grease to new needle
bearing, once the bearings rotating area. [3] [6]
bearing has been Install the needle bearings (17 x 24 x 17 mm) [1] and
removed, the (20 x 26 x 20 mm) [2] with its marked side facing up to
bearing must be the specified range using the special tools and
replaced with a new hydraulic press as shown.
one.
TOOLS: [4]/[5]
Driver handle 15 x 280L [3] 07949-3710001
Attachment, 22 x 24 mm [4] 07746-0010800
Needle bearing (17 x 24 x 30 mm):
Pilot, 17 mm [5] 07746-0040400
Needle bearing (20 x 26 x 20 mm):
Pilot, 20 mm [5] 07746-0040500 [1] [2]
Install the needle bearings (17 x 24 x 30 mm) [6] with its
marked side facing up until it is flush with the cushion Needle bearing Needle bearings
arm surface using the special tools and hydraulic press. (17 x 24 x 17 mm): (20 x 26 x 20 mm):
TOOLS: 5.3 – 5.7 mm
Driver handle 15 x 280L [3] 07949-3710001 5.8 – 6.2 mm (0.21 – 0.22 in)
(0.23 – 0.24 in)
Attachment, 32 x 35 mm [4] 07746-0010100
Pilot, 17 mm [5] 07746-0040400

[2]

[1]

18-10