Page 452 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

REAR WHEEL/SUSPENSION
Assemble the cushion arm [1] and connecting rod [2] by
installing the lower cushion arm nut [3] and bolt [4] as [1] [5]
shown.

• Assemble the cushion arm and connecting rod with [4]
"UP" mark [5] of the arm facing up.
Tighten the nut to the specified torque.
TORQUE:55 N·m (5.6 kgf·m, 41 lbf·ft) [2]
[3]

Support the motorcycle using a safety stand or hoist,
raise the rear wheel off the ground. [2]/[3]
Apply engine oil to the cushion connecting rod
mounting nut threads and seating surface.
Install the following:
– Cushion arm/connecting rod [1]
– Upper cushion arm nut [2] and bolt [3]
– Rear shock absorber lower mounting nut [4] and bolt
[5]
– Cushion connecting rod mounting nut [6] and bolt [7]
TORQUE:
Upper cushion arm nut:
74 N·m (7.5 kgf·m, 55 lbf·ft) [1] [4]/[5] [6]/[7]
Rear shock absorber lower mounting nut:
44 N·m (4.5 kgf·m, 32 lbf·ft)
Cushion connecting rod mounting nut:
45 N·m (4.6 kgf·m, 33 lbf·ft)
Install the sidestand (page 2-19).

SWINGARM

REMOVAL
Remove the left rear cover (page 2-10).
Remove the rear wheel (page 18-4). [2]
Remove the socket bolts [1] and drive chain case [2].

[1]

18-12