Page 447 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

REAR WHEEL/SUSPENSION
Drive in the bearing/collar [1] squarely with its collar
side facing down until it is fully seated.

TOOLS:
Driver [2] 07749-0010000 [2]
Attachment, 52 x 55 mm [3] 07746-0010400
Pilot, 22 mm [4] 07746-0041000 [3]

[1] [4]
INSTALLATION

Install the brake bracket [1] to the swingarm.
[1]
• Align the bracket groove with swingarm tab.

Align
Install the side collars [1] to the rear wheel.
[1]
Be careful not to Apply a thin coat of grease to the rear axle outer
damage the brake surface.
pads.
Install the rear wheel in the swingarm aligning the brake
disc between the brake pads.
Install the drive chain [2] over the driven sprocket.
[2]
Install the rear axle [3] from the left side through the left [4]
adjusting plate [4], swingarm and rear wheel.
Install the right adjusting plate [5], washer [6], and rear [3]
axle nut [7]. [1]
Adjust the drive chain slack (page 3-16).
Tighten the nut to the specified torque.
TORQUE: 100 N·m (10.2 kgf·m, 74 lbf·ft)

Check the clearance gap between the rear wheel speed
sensor bracket and pulser ring (page 20-23).
[5]
[6] [7]

18-7