Page 81 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

FRAME/BODY PANELS/EXHAUST SYSTEM
SIDESTAND

REMOVAL/INSTALLATION
Remove the sidestand switch (page 22-27) (not
necessary to disconnect the connector). [3]
Support the motorcycle securely using a hoist or
equivalent. [2]
Remove the sidestand return springs [1].
Remove the sidestand pivot nut [2] and bolt [3], then
remove the sidestand [4] and collar [5]. [5] Up
Apply molybdenum disulfide grease to the sidestand
pivot bolt sliding surface and collar outer surface. Rear
Install the sidestand and collar.
[4]
Install and tighten the pivot bolt to the specified torque.
[1]
TORQUE:10 N·m (1.0 kgf·m, 7 lbf·ft)
After tightening the pivot bolt, return the pivot bolt 45°.
Install and tighten the sidestand pivot nut to the
specified torque while holding the sidestand pivot bolt.
TORQUE:29 N·m (3.0 kgf·m, 21 lbf·ft)

Install the sidestand and return springs in the direction
as shown.
Install the sidestand switch (page 22-27).

2-19