Page 76 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

FRAME/BODY PANELS/EXHAUST SYSTEM
Disconnect the following: [2] [3]
– Grip heater control (Option) 10P (Black) connector
[1] [1]
– Brake/taillight 3P (Black) connector [2]
Release the following:
– Fan control relay [3]
– Dummy connector/DLC [4]
Remove the rear fender A (page 2-12)

[4]

CRF1000A/D: Release the rear speed sensor wire clip [1].

[1]
CRF1000A/D: Remove the oil bolt [1], rear brake hose A [2], and
sealing washers [3]. [1]

Spilled fluid can damage painted, plastic or rubber
parts. Place a rag over these parts whenever the [2]
system is serviced.

[3]
• Always replace the sealing washers with new one.

CRF1000A/D: Disconnect the rear brake hose B [1] from the ABS
modulator by removing the oil bolt [2] and sealing [1] [2]/[3]
washers [3].
Disconnect the following: [6]
– ABS modulator 18P (Black) connector [4]
– Rear speed sensor 2P (Black) connector [5]
Release the rear brake hose B and speed sensor wire
through the hole [6] of rear fender B.

Spilled fluid can damage painted, plastic or rubber
parts. Place a rag over these parts whenever the
system is serviced. [5] [4]

• Always replace the sealing washers with new one.

2-14