Page 73 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

FRAME/BODY PANELS/EXHAUST SYSTEM
PILLION SEAT

REMOVAL/INSTALLATION
Remove the main seat (page 2-4).
[2] [3] [4]
Remove the bolts [1] and collars [2].
Release the tab [3] and remove the pillion seat [4] by
pulling forward. [1]
Installation is in the reverse order of removal.

ETC TRAY

REMOVAL/INSTALLATION
Remove the seat catch stay (page 2-4).
Release the following: [6]
– Fuse box 1/2 [1]
– Fuse box 3 [2] (CRF1000D)
– Main wire harness clip [3]
– HISS 2P (Red) connector [4]
– Main wire harness clamps [5] [5]
Remove the trim clips [6] and ETC tray [7] [7]
Installation is in the reverse order of removal. [1] [2]

• Route the wire harnesses properly (page 1-26). [5] [3]

[4]
SIDE COVER
REMOVAL/INSTALLATION

Remove the pillion seat (page 2-11).
Remove the flange bolt [1] and collar [2].
Release the tabs [3] of side cover [4] from the rear [3]
carrier.
Remove the side cover by releasing the snap fit [5] and
tabs [6].
Installation is in the reverse order of removal.

[5]

[6]
[1] [2] [4]

2-11