Page 77 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

FRAME/BODY PANELS/EXHAUST SYSTEM
Remove the screw [1]. [6] [5]
Remove the mud guard [2] downward by releasing its
tab [3] from the slit [4] of the rear fender B.
CRF1000A/D: Loosen the brake pipe joint nuts [5] and
disconnect the brake pipes [6].
Remove the joint bolt [7].

Spilled fluid can damage painted, plastic or rubber
parts. Place a rag over these parts whenever the
system is serviced.
Remove the socket bolts [8]. [1]
Remove the rear fender B [9] by pulling it rearward. [7] [8]
Remove the following from the rear fender B.
– ABS modulator (page 20-24) (CRF1000A/D)
– Brake/taillight (page 22-11)
– Turn signal light relay (page 22-8) (CRF1000A/D)
Installation is in the reverse order of removal.

• Apply brake fluid to the joint nut threads. [4]
• Place the fender hooks onto the rear frame. [8]
• Route the wires, pipes and hoses properly (page 1- [3]
26).
TORQUE:
Brake hose oil bolt:
34 N·m (3.5 kgf·m, 25 lbf·ft) [2] [9]
Brake pipe joint nut:
14 N·m (1.4 kgf·m, 10 lbf·ft)

2-15