Page 94 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

MAINTENANCE
ENGINE OIL CHANGE
CRF1000A/D: Remove the skid plate (page 2-10).
[1]/[2]
Warm up the engine.
Stop the engine and remove the oil filler cap and
dipstick.
Place an oil pan under the engine to catch the engine
oil, then remove the engine oil drain bolts [1] and
sealing washers [2].
Drain the engine oil completely.

Be sure to drain the engine oil from both drain holes.
Clean the drain bolts and install new sealing washers
onto the drain bolts.
Install and tighten the drain bolts to the specified torque. [1]/[2]
TORQUE: 30 N·m (3.1 kgf·m, 22 lbf·ft)

Fill the engine with the recommended engine oil
(page 3-11).
ENGINE OIL CAPACITY:
CRF1000/A:
3.9 liter (4.1 US qt, 3.4 Imp qt) at draining
4.1 liter (4.3 US qt, 3.6 Imp qt) at oil filter change
4.9 liter (5.2 US qt, 4.3 Imp qt) at disassembly
CRF1000D:
4.0 liter (4.2 US qt, 3.5 Imp qt) at draining
4.2 liter (4.4 US qt, 3.7 Imp qt) at oil filter change
5.2 liter (5.5 US qt, 4.6 Imp qt) at disassembly
Check the engine oil level (page 3-11).
Make sure that there are no oil leaks.
CRF1000A/D: Install the skid plate (page 2-10).

ENGINE OIL FILTER

• Replace the clutch oil filter when the engine oil filter
is replaced.
Drain the engine oil (page 3-12).
Remove and discard the oil filter cartridge [1] using the
special tool.
TOOL:
Oil filter wrench 07HAA-PJ70101

[1]

3-12