Page 149 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

PGM-FI SYSTEM
MAP SENSOR

REMOVAL/INSTALLATION
Remove the air cleaner housing (page 7-11).
[2] [1]
Disconnect the MAP sensor 3P (Black) connector [1].
Remove the screw [2] and MAP sensor [3] from the
throttle body setting plate.
Disconnect the MAP sensor hose [4].
Installation is in the reverse order of removal.
[3]

[4]

ECT SENSOR

REMOVAL/INSTALLATION
Drain the coolant (page 8-4).
[1] [2]
Disconnect the ECT sensor 2P (Black) connector [1].
Remove the ECT sensor [2] and O-ring [3]. [3]
Installation is in the reverse order of removal.

• Replace the O-ring with a new one (do not apply oil).

TORQUE:12 N·m (1.2 kgf·m, 9 lbf·ft)
Fill the and bleed the cooling system (page 8-4).

IAT SENSOR
REMOVAL/INSTALLATION
Remove the air cleaner housing (page 7-11).
[2] [3]
Remove the screws [1].
Remove the IAT sensor [2] and O-ring [3].
Installation is in the reverse order of removal.

• Replace the O-ring with a new one.
TORQUE:1.1 N·m (0.1 kgf·m, 0.8 lbf·ft)

[1]

4-41