Page 434 - 2019 SHOP MANUAL CRF1000/A/D

du
dummyheadmmyhead

FRONT WHEEL/SUSPENSION/STEERING
Tighten the fork bolt Install the fork bolt [1].
after installing the [1]
fork slider into the
steering stem.

INSTALLATION
Install the forks through the bottom bridge and top
bridge so that the end of the outer pipe [1] is aligned [2] [4] [5]
with the top bridge [2] upper surface.
Tighten the bottom bridge pinch bolts [3] to the
specified torque.
[3]
TORQUE:25 N·m (2.5 kgf·m, 18 lbf·ft)
Be careful not to If the fork bolt [4] is loosened, tighten it to the specified
damage the fork torque. [1]
bolt when tightening TORQUE:35 N·m (3.6 kgf·m, 26 lbf·ft)
it.
Tighten the top bridge pinch bolts [5] to the specified
torque.
TORQUE:22 N·m (2.2 kgf·m, 16 lbf·ft)
Return the pre-load and rebound damping adjusters to
the original positions as noted during disassembly.
– Front speed sensor (CRF1000A/D) (page 20-20)
– Front wheel (page 17-14)
– Front fender (page 2-9)

STEERING STEM

REMOVAL
Remove the air cleaner case (page 7-11).
Remove the handlebar lower holder (page 17-7).
Disconnect the immobilizer receiver 4P (Black) [1] and
ignition switch 2P (Brown) [2] connectors.
[1]

[2]

17-22