Page 540 - 2019 SHOP MANUAL CRF1000/A/D

du
dummyheadmmyhead

LIGHTS/METERS/SWITCHES
Release the rubber cap [1].
[2]/[3]
Remove the bolt/washer [2] and disconnect the EOP
switch terminal [3].
Remove the EOP switch [4].
Installation is in the reverse order of removal.

• Apply sealant to the EOP switch threads as shown.
• Route the wire properly (page 1-26).
TORQUE:
EOP switch:
12 N·m (1.2 kgf·m, 9 lbf·ft) [4] [1]
EOP switch terminal bolt/washer:
2.0 N·m (0.2 kgf·m, 1.5 lbf·ft)
3 – 4 mm (0.1 – 0.2)
Fill the engine oil with the recommended engine oil
(page 3-12).

[4]
EOP SENSOR REMOVAL/
INSTALLATION (CRF1000D)

Drain the engine oil (page 3-12).
Remove the bolts [1] and alternator assembly wire
cover [2].
[1]

[2]
Drain the engine oil (page 3-12).
Disconnect the EOP sensor 3P (Black) connector [1].
Remove the EOP sensor [2].

[1] [2]

22-20