Page 256 - 2019 SHOP MANUAL CRF1000/A/D

du
dummyheadmmyhead

CLUTCH/GEARSHIFT LINKAGE (CRF1000/A)
Connect the water hoses [1] and tighten the hose band
screws [2] to the specified range (page 8-8). [2] [1]

[2]

Connect the clutch cable [1] with the clutch lifter lever
[2]. [2]

[1]
Install the bolts [1] and engine right side rear cover [2]
and tighten the bolts to the specified torque. [2]
TORQUE:10 N·m (1.0 kgf·m, 7 lbf·ft)
Fill the engine with the recommended engine oil and
check that there are no oil leaks (page 3-12).
Fill the recommended coolant mixture to the filler neck
and bleed the air (page 8-4). [1]
Adjust the clutch cable freeplay (page 3-22).

CLUTCH
REMOVAL
Remove the right crankcase cover (page 12-4).
Loosen the set plate bolts [1] in a crisscross pattern in 2
or 3 steps, and remove the bolts, set plate [2], and [1]/[3]
clutch springs [3].

[2]

12-8