Page 341 - 2019 SHOP MANUAL CRF1000/A/D

dummyheadmmyhead
du

DUAL CLUTCH TRANSMISSION (DCT) (CRF1000D)
Apply engine oil to the primary drive gear nut threads
and seating surface. [4] [3]
Install the washer [1] and primary drive gear nut [2].
Install the special tool between the primary drive and
driven gears, and tighten the nut (left-hand thread) to
the specified torque.
TOOL:
Gear holder, 2.5 [3] 07724-0010100

TORQUE: 118 N·m (12.0 kgf·m, 87 lbf·ft)
Remove the 6 mm bolt [4] to free the primary drive gear [1]/[2]
and sub-gear.
Install the right crankcase cover (page 13-55).

SHIFT CONTROL MOTOR/REDUCTION
GEARS

REMOVAL
Remove the bolts [1] and shift control motor cover [2].
[2]

[1]
Disconnect the shift control motor 2P (Black) connector
[1]. [3]
Remove the torx bolts [2], shift control motor [3], and O-
ring [4].
[1]

[2] [4]

Remove the torx bolts [1] and reduction gear cover [2].
[2]

[1]

13-71